Gebruikershulpmiddelen

Site-hulpmiddelen


Verschillen

Dit geeft de verschillen weer tussen de geselecteerde revisie en de huidige revisie van de pagina.

Link naar deze vergelijking

nl:produkte:cad_2018:registerkarten [2018/02/27 11:53] (huidige)
Regel 1: Regel 1:
 +====== Tabs ======
 +In the tabs of the irrigation planning it is possible to access information,​ use functions, and define properties. Further infomation can be found in the individual tabs.
  
 +The tabs for the objects of the upper tree structure (see [[Wasser Massenbaum]]) correspond in principal with those from the [[Objekt-Manager]],​ but not all tabs and contents are displayed.
 +
 +Besides the tabs defined in the **Pre-settings** there are tabs added to the tree structure of the **Current planning**. ​
 +\\ \\ 
 +===== Objects =====
 +In the tab **Objects** you can find a clear summary of the properties of groups in the **Current planning** (see [[Wasser Massenbaum]]). objects of the groups selected in the object tree will be displayed.\\ {{:​produkte:​cad:​planung:​was060.png?​nolink|}}
 +
 +The number of detected areas and distances as well as the length (m) and the area (m²) becomes indicated per object.
 +
 +<WRAP round important 90%>
 +If there are objects marked and deleted in this tab, the entire group displayed on the left in the object tree will be deleted.
 +</​WRAP>​
 +
 +----
 +
 +===== Material overview =====
 +In the tab **Material Overview** all materials of the selected irrigation project are listed. For this, the level of the irrigation project has to be marked in the left section of the Irrigation-Manager.
 +
 +For each material information is displayed regarding **caption**,​ **quantity**,​ **unit**, and **order number**.\\ {{:​produkte:​cad:​planung:​was061.png?​nolink|}}
 +
 +----
 +
 +===== Technical data =====
 +In the tab Technical data (such as length, water consumption,​ and pressure) are displayed for each material. The content of this tab varies with each indiviudal type of material.\\ ​
 +Unless not provided automatically materials for these objects can be selected manually (see [[Materialien zuweisen]] > Select materials). ​
 +
 +In the upper drop-down menu {{:​produkte:​cad:​planung:​was0021.png?​nolink|}} you can select a class type and in the lower one the sorted material.
 +
 +<WRAP round important 90%>
 +In the drop-down menu only the materials activated in the **Pre-settings** (see [[Wasser Massenbaum]]) are displayed. ​
 +</​WRAP>​
 +
 +=== Sprinkler ===
 +The option **Case-regulated pressure** is especially available for the field **Sprinkler** (see [[Beregnung erstellen]] > Set sprinkler automatically). function ensures that the pressure of the sprinkler is not greater than the specified value, regardless of operating - and flow pressure.
 +
 +For all sprinklers this selection of case and nozzle can be adjusted at a later stage. ​
 +
 +The slection can be locked {{:​produkte:​cad:​planung:​was081.png?​nolink|}} to also maintain the setting for automatically detected sprinklers. ​
 +
 +Partly amendments can only be made when the selection is unlocked {{:​produkte:​cad:​planung:​was080.png?​nolink|}}. For example, when a specifc sprinkler is set.
 +
 +If you click on the icon {{:​produkte:​cad:​planung:​was0024.png?​nolink|}} a dialogue box opens to select a **Set specific sprinkler** where a sprinkler can be amended later on in its **group**, **case**, and **nozzle**. After that execute the function **Recalculate sprinkler** (see [[Beregnung prüfen und bearbeiten]]) for the valve circuit (or the entire irrigation project).\\ {{:​produkte:​cad:​planung:​was067_neu.png?​nolink|}}
 +
 +Since the **difference in height** of the sprinkler to the water source has impact on the operating pressure, the difference in altitude can be entered in this tab. As soon as the value is saved the operating pressure and also all other data dependant on pressure are adjusted.
 +
 +If the same height difference is supposed to be allocated to multiple sprinklers you can mark a superordinate node in the tree (eg. valve circuit) and then select the option Enter height in the menu Extras. In the following dialogue you can enter the difference in height which is then applied to all sprinklers under this node (see [[Beregnung prüfen und bearbeiten]] > Enter heights).
 +
 +=== Valve units ===
 +In the field of the valve units all valve circuits are listed in a table (see [[Anschlüsse erstellen]] > **Set valve unit** and **Draw valve circuit**). For each valve circuit information is displayed regarding length (in m), water consumption (in m³/h), starting pressure (in bar), and flow velocity (in m/s).\\ {{:​produkte:​cad:​planung:​was069.png?​nolink|}}
 +
 +=== Water source ===
 +For the material **water source** (see [[Anschlüsse erstellen]] > Set water connection) all existing valve circuits are listed in a table, as well. Furthermore they are displayed in a graphic which is based on the already entered values for pressure and water quantity. ​
 +
 +In the **group** column multiple valve circuits can be combined depending on the feasability. For this click in the field of the individual groups on {{:​produkte:​cad:​planung:​was0025.png?​nolink|}} and select a group. After that the changes will be displayed in the graphic.\\ {{:​produkte:​cad:​planung:​was068.png?​nolink|}}
 +
 +Next to the graphic more values can be added, eg. to setup a series of measurements for flow rate and water pressure.\\ {{:​produkte:​cad:​planung:​was079.png?​nolink|}}
 +
 +----
 +
 +===== Material =====
 +There are two options to setup contents in the tab **Material**.
 +
 +In the section **Current planning** the current material is displayed in the tab **Material**. Editing is not possible here. More materials can be added and thus linked with the selected material. Please read on in [[Materialien zuweisen]] > Add materials.
 +
 +The amount of added materials (eg. number of valves) will be changed in the field **Calculation**. In case a graphic exists for the material it can be inserted into the drawing with the button **[Graphic]**.\\ {{:​produkte:​cad:​planung:​was070.png?​nolink|}}
 +
 +In the section **Pre-settings** materials can be added directly which then will be linked to the used materials. Based on the graphic above, this means that the selected valve box (Standard box assy., with screw cap) is always used with the added ND 9V valve.\\ ​
 +In addition you can define which materials are to be used in which order. Please read more in [[Wasser Tipps und Tricks]] > Define materials.\\ {{:​produkte:​cad:​planung:​was071.png?​nolink|}}
 +
 +----
 +
 +===== Properties =====
 +In Properties you can enter project-specific data that are required for the selection of sprinklers and nozzles. For this, the program provides a {{:​produkte:​cad:​planung:​check.pdf|Checklist}} which can be filled in together with the client.
 +
 +The contents of the tab **Properties** can be divided into object properties and material properties. The values specified here become the base for the hydraulic calculation of the irrigation plan.
 +
 +The object properties are defined in the upper tree structure of the **Current planning** or in the **Pre-settings**. (see [[wasser_massenbaum]])
 +
 +<WRAP round tip 90%>
 +These entries are of an informal character and do not have any impact on the actual design.
 +</​WRAP>​
 +
 +In the field **Calculation** the parameters are set for the specification of the irrigation needs. This data is crucial for the selection of sprinklers and for the frequency of irrigation.
 +
 +First, the **Base for calculation of irrigation** can be set. If the field is activated the parameters for the **soil type**, **grade**, and **water storage capacity** can be specified below. Furthermore,​ it can be defined whether the area is **vegetated** (Pre-settings) or not. This results in the maximum **amount of precipitation**,​ which can also be edited manually.\\ {{:​produkte:​cad:​planung:​was065.png?​nolink|}}
 +
 +The material properties are defined for the irrigation project to specify the water supply. The default settings are displayed in the graphic below and should be amended if necessary.
 +
 +With the option **Draw course of pressure** text-information is added to the materials which denotes the water pressure (in bar).
 +
 +The option **Display water distribution** shows the values of water coverage in a triangular bond (in mm/h) during the process of creating a valve circuit.
 +
 +For the graphical display of irrigation objects you can **Refresh drawing order automatically**. Due to numerous objects the refreshing of the drawing order can take a long time, therefore the option is turned off by default. The drawing order can also be refreshed manually in Menu **Extras** at any time.
 +
 +With the option **Mark objects in drawing** the objects marked in the object tree will also be marked in the drawing (with a dashed line). Because this can lead to delays with the [[Bewässerungs-Manager]] especially when working with superordinate levels or with many objects the option can be deactivated. This property refers to all objects in the irrigation project. Therefore, opening the Irrigation-Manager,​ especially in large drawings, can be accelerated when the option is turned off.\\ {{:​produkte:​cad:​planung:​was064_neu.png?​nolink|}}
 +
 +----
 +
 +===== Graphic =====
 +The graphics can be divided into object graphics and material graphics.
 +
 +You can add graphics to the objects in the upper tree structure. Please find more information in the section ​
 +[[Grafiken anlegen]] in the [[Objekt-Manager]].\\ {{:​produkte:​cad:​planung:​was063.png?​nolink|}}
 +
 +The materials of the irrigation project can be coloured differently. The definition of the graphic can be setup for all levels and is then applied to sub-objects. This graphic can also be defined in the **Pre-settings** (see [[Wasser Massenbaum]]) for the catalogue entry **Case**.\\ {{:​produkte:​cad:​planung:​was062.png?​nolink|}}
 +
 +----
 +
 +===== Caption =====
 +The caption can be divided in object caption and material caption. ​
 +
 +You can add captions to the objects in the upper tree structure. Please find more information in the section [[Beschriftung]] in the **Object-Manager**. In the **Irrigation-Manager** the functions are limited.\\ {{:​produkte:​cad:​planung:​was066.png?​nolink|}}
 +
 +The materials can be labelled with various information. This can happen in the Material specifications of both, the **Current planning** and the **Pre-settings** (see [[Wasser Massenbaum]]). The caption can be defined on all levels and is then applied to the sub-objects.
 +
 +Further information about the application can be found in the section [[Materialien zuweisen]] > Label materials.\\ {{:​produkte:​cad:​planung:​was0015.png?​nolink|}}
 +
 +----
 +
 +===== Analysis =====
 +With this function you can review the distribution of the water distribution for the proposed sprinklers and detect under- or over-supply in the diagram. For this, all sprinklers in the current irrigation project are analyzed.\\ {{:​produkte:​cad:​planung:​was0005.png?​nolink|}}
 +
 +=== Functions ===
 +|**Add**|Opens the dialogue **Analysis water distribution** and creates an analysis.|
 +|**Edit**|Opens the selected analysis in the dialogue **Analysis water distribution**.|
 +|**Delete**|Deletes the selected analysis from the list and the drawing.|
 +|**Refresh**|Refreshes the selected analysis with the new sprinkler-data.|
 +|**Refresh all**|Refreshes all analysis with amended sprinkler-data.|
 +
 +=== Functions Dialogue Analysis water distribution ===
 +|{{:​produkte:​cad:​planung:​zei0113_2013.png?​nolink|}}|**Manage configurations**:​ Opens the dialogue to load, save, and delete configurations.|
 +|{{:​produkte:​cad:​planung:​zei0115_2013.png?​nolink|}}|**Save as standard**: Saves the settings as the configuration **Standard** so that those settings can be used for new analysis.|
 +|{{:​produkte:​cad:​planung:​zei0116_2013.png?​nolink|}}|**Apply**:​ Ends the dialogue and creates a new analysis or applies the settings to the selected analysis.|
 +|{{:​produkte:​cad:​planung:​zei0117_2013.png?​nolink|}}|**Cancel**:​ Ends the dialogue without saving the changes or data.|
 +|**Colour gradient**|**Colour 0%/Colour 100%/Colour 300%**: Display of the water coverage as coloured gradient, where the individual colours denote the range of water distribution.\\ \\ **Detailing**:​ The colour gradient of the water analysis will be calculated as a pixel image and inserted into the drawing. The precision can be controlled with: **rough**, **medium**, and **fine**.\\ <WRAP round important 85%>The finer an analysis, the greater the memory requirements. This also applies to the number of analysis in the drawing.</​WRAP>​**Lower threshold/​Upper threshold**:​ Appoint the minimum and maximum irrigation coverage in %. In additon to the coverage, areas can be shown where water distribution is too low or too high. Once the water distribution has reached this threshold the set colour is displayed\\ {{:​produkte:​cad:​planung:​was036.png?​nolink|}}|
 +|**Layer**|Creates the analysis on the selected layer.|
 +
 +Please find more information about the application in the section [[Beregnung prüfen und bearbeiten]] > Analyse water distribution.
 +
 +----
 +
 +===== Sprinkler overview =====
 +In the tab **Sprinkler overview** all sprinklers of the selected valve circuit are listed. For this, select a level of a valve circuit on the left of the the Irrigation-Manager. ​
 +
 +For each sprinkler informations are displayed regarding operating pressure (in bar), water pressure (in bar), water distribution (triangle in mm/h), water distribution (rectangle in mm/h), and water consumption (in m³/h).\\ {{:​produkte:​cad:​planung:​was059.png?​nolink|}}
 +
 +----
 +
 +===== Pipe dimensions =====
 +In the tab **Pipe dimensions** the materials of the selected water pipe (see [[anschluesse_erstellen|draw pipe]]) ​ or the valve circuit (see [[anschluesse_erstellen|draw valve circuit]]) will be listed.\\ {{:​produkte:​cad:​planung:​was085.png?​nolink|}}
 +
 +With the pipe dimensions you can already switch pipe and valve circuit sizes during the creation by using the button **[Change Material]** and thus using smaller DN sizes earn cost savings.
 +<WRAP round tip 90%>
 +The change of material can be defined later with the function {{:​produkte:​cad:​planung:​was016.png?​nolink|}} **Edit**.
 +</​WRAP>​
 +
 +After the definition of the intersections for the material change, materials will be suggested automatically and values within the table will be recalculated. The choice of material can be changed over the button **[...]**. After that, the manual selection will be **fixed**. ​
 +
 +<WRAP round tip 90%>
 +When several sizes are used for a pipe or a valve circuit, the entry in the mass tree will be changed from the name of the individual material to "​**different**"​.
 +</​WRAP>​