Gebruikershulpmiddelen

Site-hulpmiddelen


Verschillen

Dit geeft de verschillen weer tussen de geselecteerde revisie en de huidige revisie van de pagina.

Link naar deze vergelijking

nl:produkte:cad_2017:objekte_anheben_absenken [2016/03/23 14:08] (huidige)
Regel 1: Regel 1:
 +====== Raise/lower objects ======
 +<WRAP round info 60%>
 +Command: **PHOEHEN**
 +</​WRAP>​
  
 +===== Description =====
 +This command raises lines, splines, polylines, circles, arcs, and ellipses to a new altitude.
 +
 +===== Procedure =====
 +  - After entering the command all drawing elements to be placed on a new level need to be selected in the drawing. After confirmation with<​wrap caps>​**Enter**</​wrap>​ a new dialogue opens:\\ {{:​produkte:​cad:​dgm:​dgm0027.png?​nolink|}}\\ \\ 
 +  - The **absolute** heights can be changed to a new value or the drawing elements can be raised / lowered **relative** to their original position by a differential value. ​
 +  - Alternatively change all elements together or each object individually. Specify the desired **new height** or **shift** for the collective amendment.
 +  - The dialogue is closed with **[OK]** and the settings are applied instantly to the drawing. ​
 +
 +
 +<WRAP round tip 90%>
 +When **editing individual elements** the input option for a **new altitude** is deactivated and after confirming the dialogue with **[OK]** requested individually. Each drawing element is then marked in the drawing and in the command prompt the existing height is displayed for reference.
 +</​WRAP>​