Gebruikershulpmiddelen

Site-hulpmiddelen


Verschillen

Dit geeft de verschillen weer tussen de geselecteerde revisie en de huidige revisie van de pagina.

Link naar deze vergelijking

nl:produkte:cad_2017:hoehenpunkte_verschieben [2016/03/23 14:08] (huidige)
Regel 1: Regel 1:
 +====== Move levels ======
  
 +<WRAP round info 60%>
 +Command: **PMOVE**
 +</​WRAP>​
 +
 +===== Description =====
 +This command moves individual or multiple levels along the X-, Y-, or Z-axis.
 +
 +===== Procedure =====
 +  - After entering the command individual or multiple levels can be selected. After confirmation with <wrap caps>​**Enter**</​wrap>​ a new dialogue opens:\\ {{:​produkte:​cad:​dgm:​dgm0025.png?​nolink|}}\\ \\ 
 +  - The change of levels can be make **absolute** to a new level or **relative** to the original position. If only one point is selected the exact coordinates are displayed below.
 +  -  If multiple levels with different altitudes or coordinates are selected **different** is displayed.\\ {{:​produkte:​cad:​dgm:​dgm0026.png?​nolink|}}\\ \\ 
 +  - Always the new entries are changed. If for example multiple levels were selected and a new relative value of 4.0 is entered at height, all levels are raised by 4.0m without a change to the coordinates. ​