Gebruikershulpmiddelen

Site-hulpmiddelen


Verschillen

Dit geeft de verschillen weer tussen de geselecteerde revisie en de huidige revisie van de pagina.

Link naar deze vergelijking

nl:produkte:cad_2017:boeschungsschraffur [2016/03/23 14:08] (huidige)
Regel 1: Regel 1:
 +====== Create slope hatch ======
 +<WRAP round info 60%>
 +Command: **BSCHRAFF**
 +</​WRAP>​
  
 +===== Description =====
 +With this command you can create a slope hatch between two contour lines. The lines can be open or closed. ​
 +
 +===== Procedure =====
 +{{youtube>​NS5tMxTBVcI?​medium}}\\ ​
 +
 +
 +===== Functions =====
 +The dialogue contains Options:\\ \\ {{:​produkte:​cad:​entwurf:​bschraff.png?​nolink|}}\\ ​
 +
 +**Automatic** creates the short lines always at half lenght between top and toe of the slope. When deactivating this option the length for the short lines can be entered in percent (compare figure a. and d.). The **Spacing** controls the spacing between the long lines.
 +
 +All slope hatches will be created in 2D. With the option **3D** you can created lines in 3D space, in which top and toe of slope will be joined (compare figure e. and f.).
 +
 +With the option **Rotate** you can swap top and toe of slope (compare c. and d.).
 +
 +With **Force** the slope hatch between top and toe of the slope will be drawn to the ends of the lines (compare a. with b.).
 +
 +The option **Fill** creates a solid hatch between top and toe of the slope, in which any layer can be selected or created (compare a. with c.). This hatch will be created in 2D.
 +
 +|a.\\ {{:​produkte:​cad:​entwurf:​zei0024.gif?​nolink|}}|b.\\ {{:​produkte:​cad:​entwurf:​zei0025.gif?​nolink|}}|
 +|c.\\ {{:​produkte:​cad:​entwurf:​zei0026.gif?​nolink|}}|d.\\ {{:​produkte:​cad:​entwurf:​zei0027.gif?​nolink|}}|
 +|e.\\ {{:​produkte:​cad:​entwurf:​zei0028.gif?​nolink|}}|f.\\ {{:​produkte:​cad:​entwurf:​zei0029.gif?​nolink|}}|
 +
 +<WRAP round tip 90%>
 +All slope hatches are associative,​ i.e. when changing top and toe of slope the hatch will be changed, too.
 +</​WRAP>​