User Tools

Site Tools


Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:produkte:cad_2016:codierung [2013/10/23 11:49] (current)
Line 1: Line 1:
 +====== Code ======
  
 +===== Description =====
 +Already when surveying lines, circles, arcs, etc. and attributes of the surveyed points can be specified. These items are then automatically converted to drawing elements with associated technical information when imported into DATAflor CAD. 
 +
 +<WRAP round tip 90%>
 +The details on the code apply to all import commands.
 +</​WRAP>​
 +
 +The code is pre-defined in DATAflor CAD. In the dialogue **Code** you can conveniently adjust the contents of the Code List according to your own work method. In addition, further codes can be defined.\ {{:​produkte:​cad:​dgm:​total0011.png?​nolink|}}
 +
 +==== Code list ====
 +{{:​produkte:​cad:​dgm:​codetabelle_sachinformationen.pdf|}}\\ ​
 +{{:​produkte:​cad:​dgm:​codetabelle_grafikinformationen.pdf|}}
 +
 +**Example of the choise file:​**\\ ​
 +The Code 30510070 denotes the location of a deciduous tree, which is presented in the drawing by a circle with the diameter 70 cm.
 +
 +|30|= Deciduous tree|
 +|5|= Circle|
 +|1|= Point with diameter|
 +|0070|= 70 cm|
 +
 +===== Functions =====
 +==== Method ====
 +With double-clicking into the field **Note** an entry into the selected code can be made, then confirm your entry with **<wrap caps>​Enter</​wrap>​**. ​
 +
 +After double-clicking into the column **Block** kann über **[...]** a block (DWG-file) can be selected with **[...]**. ​ This way, a block with a scale can be inserted straightaway for a survey point when importing data from the total station.
 +
 +<WRAP round important 90%>
 +Take into consideration for the **survey** when using of blocks: For the use of blocks the **graphic code** in the field //point// is complemented. Besides the Code for the simple //Point (0)// and //Point with diameter (1)// the option **Point with block (3)** can be used. With the places 5-8 the **size** can be defined in **cm**.
 +</​WRAP>​
 + 
 +With **[OK]** the changes are saved.
 +
 +<WRAP round tip 90%>
 +DATAflor provides a selection of blocks. The data is stored in the user directory (see [[Wichtige Hinweise]] > chapter **Backup**] of DATAflor CAD in the folder **Codierung**.\\ ​
 +You can also create your own blocks. Please refer to the Notes to create blocks (see [[tipps_entwurf|Tips and Tricks]] > chapter **Create block**).
 +</​WRAP>​
 + 
 +==== Menu Configuration ====
 +With **Save as standard** the current settings are saved. This standard only applies as the default for new drawings.\\ ​
 +When manual changes have been done, the function **Load standard** will load the default settings.\\ ​
 +The list of encoding you can **Copy to clipboard** and insert it into a text processing software.\\ ​
 +{{:​produkte:​cad:​dgm:​total012.png?​nolink|}}
 +
 +With **Manage** you can create Configuration //Default// as well as further configurations.\\ ​
 +{{:​produkte:​cad:​dgm:​total013.png?​nolink|}}
 +
 +|**OK**|Applies the changes.|
 +|**Cancel**|Discards all changes.|
 +|**Load**|Loads an already saved configuration that was previously marked in the list.|
 +|**Save**|Saves the current settings in the selected configuration.|
 +|**Save as**|Saves the current settings with a defined name. The new configuration is added to the list.|
 +|**Copy**|Copies an already saved setting.|
 +|**Delete**|Removes a saved setting.|