User Tools

Site Tools


Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:produkte:cad_2016:beregnung_erstellen [2013/06/19 10:12] (current)
Line 1: Line 1:
 +====== Create Irrigation ======
 +===== Set sprinklers automatically =====
 +=== Description ===
 +Place the detected sprinklers automatically in the site. On the basis of water pressure (see [[Registerkarten]] > Technical Data), radius and throwing range the program can choose from the material catalogue the suitable model with a fitting nozzle. After entering the function you are asked to specify the location for the sprinklers in the drawing.
  
 +=== Procedure ===
 +Start the function with Menu **Irrigation > Rotating sprinkler > Set sprinklers automatically** or with the icon {{:​produkte:​cad:​planung:​was004.png?​nolink|}}. ​
 +
 +  - Specify a position (**centre**) for the sprinkler in the drawing.
 +  - Drag open the **radius** and specify the start point for the range.\\ <WRAP round tip 85%>
 +<WRAP column 40%>
 +{{:​produkte:​cad:​planung:​was075.png?​nolink|}}
 +</​WRAP>​
 +<WRAP column 50%>
 +Two green circles appear near the cursor. They denote the minimum and maximum radius. By entering a value for the radius the **start point of the range** is calculated automatically from the location of the cursor.
 +</​WRAP>​
 +</​WRAP>​
 +  - Drag the **angle** open and click the end point for the range.\\ <WRAP round tip 85%>
 +For a **circle** enter the value //​360//​.</​WRAP>​
 +  - For more sprinklers repeat the first steps.
 +  - Close the task with <wrap caps>​**Enter**</​wrap>​.
 +  - The created sprinklers are listed automatically in the **Irrigation-Manager** under {{:​produkte:​cad:​planung:​was022.png?​nolink|}} **without allocation**.
 +
 +----
 +
 +===== Set a specific sprinkler =====
 +=== Description ===
 +With this function a specific sprinkler can be selected from the imported material catalogues and placed on the site. After calling up the function you are asked to choose the sprinkler in the following dialogue.\\ {{:​produkte:​cad:​planung:​was0003.png?​nolink|}}
 +
 +=== Procedure ===
 +Start the function with Menu **Irrigation > Rotating sprinkler > Set a specific sprinkler** or with the icon {{:​produkte:​cad:​planung:​was017.png?​nolink|}}.
 +
 +  - In the dialogue select **Group**, **Case**, and **Nozzle**.
 +  - Specify the location (**centre**) for the sprinkler in the drawing.
 +  - Rotate the object and click when the desired **orientation** is reached.
 +  - For more sprinklers repeat the steps 2 and 3.
 +  - Confirm the specifications with <wrap caps>​**Enter**</​wrap>​.
 +  - The created sprinklers are listed automatically in the **Irrigation-Manager** under  {{:​produkte:​cad:​planung:​was022.png?​nolink|}} **without allocation**.
 +
 +----
 +
 +===== Set rectangle sprinkler =====
 +=== Description ===
 +With this function a specific rectangle sprinkler can be selected from the imported material catalogues and placed on the site. After calling up the function you are asked to choose the sprinkler in the following dialogue\\ {{:​produkte:​cad:​planung:​was0003.png?​nolink|}}
 +
 +=== Procedure ===
 +Start the function with Menu **Irrigation > Set rectangle sprinkler** or with the icon {{:​produkte:​cad:​planung:​planung2:​rechteckregner_2014.png?​nolink|}}. ​
 +
 +  - In the dialogue select **Group**, **Case**, and **Nozzle**.
 +  - Specify the **location** for the sprinkler in the drawing.
 +  - Rotate the object and click when the desired **orientation** is reached.
 +  - For more sprinklers repeat the steps 2 and 3.
 +  - Confirm the specifications with <wrap caps>​**Enter**</​wrap>​.
 +  - The created sprinklers are listed automatically in the **Irrigation-Manager** under  {{:​produkte:​cad:​planung:​was022.png?​nolink|}} **without allocation**.
 +
 +----
 +
 +===== Draw drip pipe =====
 +=== Description ===
 +The function Drip pipe can be used for the irrigation plan of small or irregular areas or of hedges and planter boxes to achieve a even and slow moisture penetration of the root zone. You create a line which you can allocate to materials later on in the **Irrigation-Manager**.
 +
 +=== Procedure ===
 +Start the function with Menu **Irrigation > Drip pipes > Draw drip pipe** or with the icon {{:​produkte:​cad:​planung:​was028.png?​nolink|}}.
 +
 +  - Specify the start point for the pipe in the drawing.
 +  - Click additional points in the drawing to create the course of the pipe.
 +  - Click on the endpoint of the pipe.
 +  - Click the button **[Done]** to close the dialogue for creating a drip pipe.
 +  - The drip pipe is listed automatically in the **Irrigation-Manager** under {{:​produkte:​cad:​planung:​was022.png?​nolink|}} **without allocation**. ​
 +  - Allocate a material to the //drip pipe//. Please read on in the section [[Registerkarten]] > **Technical Data**. Specify values for **Spacing** and **Flow rate**.
 +
 +<WRAP column 20%>
 +{{:​produkte:​cad:​planung:​was0006.png?​nolink|}}
 +</​WRAP>​
 +<WRAP Column 73%>
 +^Function^Description^
 +|**Draw**|Draws a line through specified points and denotes the course of the pipe.|
 +|**Insert points**|Adds points between the existing points. For this, select the point before the point to be inserted first, and then specify the new points.|
 +|**Delete points**|Deletes the selected point.|
 +|**Undo**|Reverses the most recent action.|
 +|**New drip pipe**|The drawing of the current drip pipe is ended (and saved) and a new pipe is started.|
 +|**Done**|Ends the drawing of the current pipe, closes the dialogue **drip pipe** and displays the **Irrigation-Manager** again. The new objects can be found in the group {{:​produkte:​cad:​planung:​was022.png?​nolink|}} **without allocation**.|
 +</​WRAP>​
 +<WRAP clear></​WRAP>​
 +
 +<WRAP round important 90%>
 +Drip pipes are not automatically added to the valve circuit. Select the function **[Add]** when creating a valve circuit. Please find further information in [[Anschlüsse erstellen]] > Draw valve circuit.
 +</​WRAP>​
 +
 +----
 +
 +===== Draw drip pipe in area =====
 +=== Description ====
 +The function Drip pipe in area can be used for the irrigation plan of small or irregular areas to achieve an even and slow moisture penetration of the root zone. Create an area that materials are allocated to in the **Irrigation-Manager**.
 +
 +=== Procedure ===
 +Start the function with Menu **Irrigation > Drip pipe in areas > Draw drip pipe area** or with the icon {{:​produkte:​cad:​planung:​was039.png?​nolink|}}.
 +
 +  - Specify in the drawing the start point of the area.
 +  - Click at least two other points to create an area.
 +  - If you want to end the creation of the area click on the button **[Done]**.
 +  - The drip pipe area is listed automatically in the **Irrigation-Manager** under {{:​produkte:​cad:​planung:​was022.png?​nolink|}} **without allocation**.
 +  - Allocate a material to the //drip pipe area//. Please read on in the section [[Registerkarten]] > Technical Data. Specify the values for **spacing**,​ **flow rate** and **laying density**. ​
 +
 +<WRAP round important 90%>
 +The length of the drip pipe is calculated on the basis of the laying density.
 +</​WRAP>​
 +
 +<WRAP column 20%>
 +{{:​produkte:​cad:​planung:​was0006_2.png?​nolink|}}
 +</​WRAP>​
 +<WRAP column 72%>
 +^Function^Description^
 +|**Draw**|Draws an area through specified points and denotes the area that is fit out with pipes.|
 +|**Insert points**|Adds points between the existing points. For this, select the point before the point to be inserted first, and then specify the new points.|
 +|**Delete points**|Deletes the selected point.|
 +|**Undo**|Reverses the most recent action.|
 +|**New drip pipe**|The drawing of the current drip pipe is ended (with save) and a new pipe is started.|
 +|**Done**|Ends the drawing of the current pipe, closes the dialogue **drip pipe** and displays the **Irrigation-Manager** again. The new objects can be found in the group {{:​produkte:​cad:​planung:​was022.png?​nolink|}} **without allocation**.|
 +</​WRAP>​
 +<WRAP clear></​WRAP>​
 +<WRAP round important 90%>
 +Drip pipe areas are not automatically added to the valve circuit. Select the function **[Add]** when creating a valve circuit. Please find further information in [[Anschlüsse erstellen]] > Draw valve circuit.
 +</​WRAP>​